Description
The True STA2H-4HS heated holding cabinet is designed to safely hold baked and cooked foods at serving temperatures in demanding commercial foodservice environments. The cabinet maintains holding temperatures from 140°F to 180°F and is not intended to heat ambient or cold product. Its solid half swing door configuration helps reduce heat loss during frequent access while improving workflow efficiency. Built with a stainless steel exterior and aluminum interior side walls and back with stainless steel floor and ceiling, this unit provides durability, sanitation, and consistent heat distribution for reliable hot food holding.
Key Features
Heater System
Cabinet designed to provide holding temperatures of 140°F to 180°F (60°C to 82.2°C)
Heating system controlled by exterior on/off switch and electronic temperature control
One stainless steel heating element for uniform generation of electric heat
Total heating capacity of 3000 watts
Equipped with low-velocity fans to assure even temperature distribution throughout the cabinet
Manually controlled vent located on top of the cabinet for positive humidity control
Cabinet Construction
Entire cabinet structure and solid doors foamed-in-place using high density polyurethane insulation with zero ozone depletion potential and zero global warming potential
5 in (127 mm) diameter plate casters with locks provided on front set
Door System – Solid Half Swing Doors
Solid stainless steel half swing doors
Lifetime guaranteed bolt style door locks standard
Lifetime guaranteed heavy-duty all-metal working door handles
Positive seal self-closing doors with 120-degree stay open feature
Lifetime guaranteed external cam lift door hinges, four per door section
Magnetic door gaskets of one-piece construction, removable without tools
Shelving
Three heavy-duty, chrome plated wire shelves per section
Model Features and Compliance
Exterior digital temperature display available in °F or °C
Designed to hold warm baked or cooked food; cabinet is not designed to heat ambient or cold product
NSF-4 compliant for open food product
Electrical
Unit requires a dedicated sole-use circuit
Comes with three feed wires including ground for hardwired installation
Electrical requirement: 208240V / 60Hz / single phase, 20 amp dedicated circuit
Warranty
Three-year warranty on all parts and labor
Reviews
There are no reviews yet.