Description
The Duke E-6-DLSS Thurmaduke Heavy Duty Food Table is a refined and durable commercial foodservice equipment that contains 6 wells. Constructed of one-piece 16-gauge, 300 Series stainless steel, the top of the table extends from the operator’s side to provide integral carving or work surface. Each top opening is die-stamped with raised beaded edges that measure 12×20″. A bottom warming compartment is provided under each sealed well compartment with a (1) 750-watt element fitted under it. The element is drain and copper manifolded to the brass master valve. Each section of the unit is controlled by the Robertshaw thermostat, featuring an indicator light. The entire unit is wired to the master toggle switch that also has an indicator light installed on it.
Duke E-6-DLSS has its body constructed of 20-gauge, 300 Series stainless steel and is also available in paint grip steel with powder coating finish option. Each body part is made into panels by forming each edge into angles and channels which are then welded to add more strength to the structure. End panels on this table are die-stamped along with square corners, and the enclosed side opposite the operator. The compartment liner is die-formed and fabricated of heavy-gauge stainless steel. The stainless steel bottom shelf has its edges flanged down at the back and ends. There is a clearance of 15-1/2″ between the wells and the bottom shelf. An integral dish shelf is 8-1/2″ wide and features a rail on the operator’s side.
It has easy-to-reach control knobs and features housing for thermostats that gives more protection to the internal mechanism. This hot food table stands on four (4) durable and adjustable 6″ legs that are made of stainless steel and have a polished finish. The legs can be adjusted to 7-1/4″ height. This unit complies with NSF Standard 4 norms.
Duke E-6-DLSS Thurmaduke Heavy Duty Food Table with 6 wells
Top constructed of one-piece 16-gauge, 300 Series stainless steel
Top extended from the operator’s side to provide integral carving or work surface
Each top opening die-stamped with raised beaded edges measuring 12×20″
Bottom warming compartment provided under each sealed well compartment
One (1) 750 watt element fitted under warming compartment
Element drain and copper manifolded to the brass master valve
Each section controlled by the Robertshaw thermostat, featuring an indicator light
Entire unit wired to master toggle switch with indicator light
Body constructed of 20-gauge, 300 Series stainless steel
Also available in paint grip steel with powder coat finish option
Each body part made into panels by forming each edge into angles and channels that are welded for added strength
End panels, square corners, and the enclosed side opposite the operator die-stamped
Compartment liner die-formed and fabricated of heavy-gauge stainless steel
Stainless steel bottom shelf with flanged down edges at back and ends
Clearance of 15-1/2″ between wells and bottom shelf
Integral dish shelf 8-1/2″ wide
Rail on operator’s side
Easy-to-reach control knobs
Thermostat housing to protect the internal mechanism
Four (4) durable and adjustable 6″ legs made of stainless steel and polished finish
Legs adjustable to 7-1/4″ height
Complies with NSF Standard 4 norms
Wired to operate on 120, 208, 240 volts, single- or three-phase electrical connection
Reviews
There are no reviews yet.